MOBILE TRICKS

This is the manual gprs settings for vodaphone for all states in india.i collected this free vodaphone gprs trick while surfing the net and i post it here for my readers.this settings successfull worked for using gprs free in a HTC mobile without subscribing to any of their pay plans.hope if works for you.
to activate free vodaphone gprs first who have to manually add these gprs settings and access points as given below in mobile,
First go to Settings -> Connections -> Hutch WAP (GPRS) (or create one if you dont have this already)
Connects to: Work
Access point is: portalnmms
User name: (empty)leave it
Password: (empty) leave it
Authentication type: Select the option ‘None’
Primary DNS: (empty)
2nd DNS: (empty)
IP Address: 10.10.1.100

Then go to Settings ->Proxy -> Hutch WAP Proxy (Again, create if you don’t have it already)
Connects from: Work
Connects to: WAP Network
Proxy (Name:port):10.10.1.100:9401
Type: Select ‘HTTP’
User Name: (empty)
Password: (empty)

Open Internet Explorer -> Tool -> Options -> Connections
Un-check the Automatically Detect Settings option
Select Network: WAP Network and its done you will be able to use free internet or gprs in your mobile.i obtained this post from one of my co-bloggers and hope it works well for you.

tags: free gprs settings,manual gprs settings 2009 vodaphone,internet settings for htc mobiles.

This gprs trick is about wiretaping in sony ericcson mobile phones.it is illegel as all we know but still i post it here to make you aware of the flaws in gprs networks.i explained about how to perform wiretaping trick in sony ericcson mobiles.

Wireless Application Protocol, WAP sony ericcson mobile phones has a security problem in it that allows attackers to listen or copy others browsing details or passwords they are using on the wap networks traveling on the cellular carrier wave.

how to wiretap from sony ericcson mobile:

• Type 904059
• Menu
• Yes
• 1
• RCL
• Yes
• 8300**
• Yes
• 86
  

you can replace ** with any other number except 00.this is how to perform wiretaping to steal other wap browsing data from other mobiles.

to stop wiretaping:
To stop the wiretapping in your sony ericcson mobile follow these steps

• Type RCL
• 3
• Yes

tags: gprs tricks,access others mobile through gprs connection,sony ericcson tricks

DOWNLOAD CRACK KEY

Hi friends do you want your inbox to be always new with fresh sms messages sent from various people around india?Then to receive free jokes and sms to your mobile whether it is airtel or vodaphone or relience or idea or cellone or aircel or spice,any operator network in india,you will receive the sms messages.
Type JOIN GROUP NAME & sms it to 567678. example: JOIN hi5wi5 & send it to 567678( 'hi5wi5' is 'Group Name')
you will get fresh jokes,sms,mobile tricks etc directly to your mobile,but when you first join the group you will be deducted a balance of rupees 3.
afterthat you will never be charged.
Here are some popular Groups all over India...
dhiraj
Rockstar
Zamran
Lovebuz
Dil_Mil_Gaye
happies_endings
maniguru
Krazzyboy
HarJagaHaiJal
LIVESMS
hi5wi5so join any of the group you personally like and enjoy the free sms messages in your mobile.

The following are the secret codes and tricks for viewing imei and firmaware and for unlocking china and korean mobiles.check the secret codes of china mobiles below
*#66*# Set Factory Mode CONFIRMED
*#8375# Show Software Version CONFIRMED
*#1234# A2DP ACP Mode CONFIRMED
*#1234# A2DP INT Mode CONFIRMED
*#0000# + Send : Set Default Language CONFIRMED
*#0007# + Send : Set Language to Russian CONFIRMED
*#0033# + Send : Set Language to French CONFIRMED
*#0034# + Send : Set Language to Spanish CONFIRMED
*#0039# + Send : Set Language to Italian CONFIRMED
*#0044# + Send : Set Language to English CONFIRMED
*#0049# + Send : Set Language to German CONFIRMED
*#0066# + Send : Set Language to Thai CONFIRMED
*#0084# + Send : Set Language to Vietnamese CONFIRMED
*#0966# + Send : Set Language to Arabic CONFIRMED

This trick is the one all in india know,and was working for quit a lot of time in india,but before few months in was not working for free airtel gprs and airtel live browsing,but now all of a sudden certain people are saying and has posted that free teashark browsing still works in certain midp 2.0 version handsets and works only for free browsing and not for free downloads via airtel live.In case If you have Airtel live only then dont worry follow the free download link.~!~ Install teashark in your mobile(symbianfullversion.blogspot.com) in your mobile and select Airtel live Paid profile (Yes original 30 paisa/20kb profile) and start browsing.The teashark trick is that if you browse via teashark you wont get deducted any balance for browsing data downloads.but as you know teashark is web browser for wap.

Within Teashark make a bookmark of http://proxy.wapstart.ru/ and Use it for all Wap-sitesAt same speed as surfing directly.

1>Service centre No:- +9198630022222>
Validity period:-Maximum3>
Message type:- Text4>
Reply path:- Off5>
Delivery report:- Off
your balance must be zero and you can sent any number text messages in reliance to anywhere using these sms centre number and free sms settings.

This post contains secret codes for lg mobiles that can b used to find factory settings and other functions.
LG MOBILE SECRET CODES -
Factory test(B1200): #PWR 668Simlock menu
(LG B1200): 1945#*5101#
Simlock menu(LG 510W, 5200): 2945#*5101#
for more secret codes of lg mobiles check my latest posts on lg mobile secret codes.

have your balance less than 2 rs
send message to activate airtel gprs gprs7 and send to 56789
your balance will go to negative 30 rs.
thats set,recharge your mobile and enjoy unlimited gprs for seven days by spending only 30 rs which otherwise is 75 rs.this is the steps to activate free airtel mobile office 7 days pack for 30 rs.

Free Airtel Gprs Settings:
Proxy address:100.1.200.150
Port to be used: 8080
Homepage:www.google.com/m
Access Point =:airtelmms.com
Username: none(leave blank)
Password : none(leave blank)
Ask for Password = no
when you connect free gprs you will be asked for username and password,
USERNAME = your Mob. No. (Eg- 9994385511)
PASSWORD = Last six digit of your Mob.No. (Eg-385511)
thats all! now you could use free airtel mobile gprs from your mobile phone
.

Free gprs in bsnl
here are the steps to perform:-
Logic: the server has a major bug in it, by which it fails to block two simultaneous connections from the phone and establishes a connection with full internet working,
Supported devices: all phones with multichannel gprs support
For connection on your mobile phone:-
1) Make two connections like bsnlportal and BSNLPORTAL1
(names of profile don’t matter, u can keep one as billgates and shahrukhkhan lol..the basic purpose of names is to enable the user to differentiate between the two accounts,)
2) Select the application you got to have the full connection working on.Surpassingly “web” now just select “bsnlportal” profile and select a link like wap.cellone.in the page will get open, just press the red button such that the “web” application goes in the background.Make sure that the gprs connection is still established with the web app. Two parallel lines on the top left of the screen will confirm this
3) Now open any other app that requires web connection like opera. Select BSNLPORTAL and open any other link like wap.google.com, u will get error –
the aim of using the other app is to perform multi-channel gprs,this is verified by seeing some dots on the pre-existing connection established by “web”
(step 2)
“Access denied.
Technical description:403 Forbidden – You are not allowed to communicate with the requested resource.”
4) close opera and open web and open a site like esato.com
5) if everything is done as said here then esato will load and voila! We have the whole internet!
For connection on pc.
1)create a connection and enter the number to be dialed as *99***1#
2) enter the following string as extra initialization command
3)now dial from pc, the connection will be established
4)pick the phone and open “web” open “wap.cellone.in” the phone shows error .
5) close “web” and then from the browser open www.google.comand voila! The whole intenet is here
settings for profiles
apn: celloneportalip: 192.168.51.163port : 8080
leave other fields blank as they are of the least concern!
the browser settings on pc too go the same as mentioned above!

KEY GENERATION

KEY

SOFTWARES FOR MOBIKLE

To check the IMEI (International Mobile Equipment Identity) Type-

*#06#

Information you get from the IMEI-

XXXXXX XX XXXXXX X

TAC FAC SNR SP

• TAC = Type approval code

• FAC = Final assembly code

• SNR = Serial number

• SP = Spare

To check the phones Software revision type-

*#0000#

Information you get from the Software revision-

V 05.31

18-02-99

NSE-3

• 1ST Line = Software revision

• 2ND Line = The date of the software release

• 3RD Line = Phone type

To enter the service menu type-

*#92702689# (*#WAR0ANTY#)

• Serial number (IMEI)

• Production date (MM/YY)

• Purchase date (MM/YY) You can only enter the date once.

• Date of last repair (0000=No repair)

• Transfer user data to another Nokia phone via Infra-Red

Clock Stopping

To check weather your SIM Card supports clock stopping type-

*#746025625# (*#SIM0CLOCK#)

Revealing the Headphone and Car-Kit menus

Please note that if you do these next tricks, the new menus can't be erased without retoring the factory default settings. To do these tricks you need to short-circuit the pins on the bottom of the phone next to where you plug in you charger.

1. To activate the "Headset" menu, you need to short-circuit pins "3" and "4". After a short time the word "Headset" will be shown in the display. Menu 3-6 is now enabled.

2. To activate the "Car" menu, you need to short-circuit pins "4" and "5". After a short time the word "Car" will be shown in the display. Menu 3-7 is now enabled.

THE REBOOT TRICK

This should work on all software versions of the 6110.

1. Go to the Calendar (Menu-8)

2. Make a note or reminder.

3. Enter some text into the edit box.

4. Hold "Clear" until the whole text is cleared, then press "Back".

5. Press "0". The main screen will now be showing but a space appears on the screen. (you can't see it)

6. Enter 4 digits (e.g. 1234).

7. Use the down arrow to move the cursor to the left side of the numbers and the space (Down arrow twice).

8. Now enter 6 digits and press the call button.

Wait for a few seconds, the screen should start to flash and reboots. It should alsowork on other menus like the "Profiles" menu.

EFR CALL QUALITY

To activate EFR (Enhanced Full Rate) Enter the code-

*3370#

This improves call quality but decreases batterylife by about 5%

To deactivate it, Enter the code-

#3370#

THE JAMES BOND TRICK

If you short-circuit theleft middle and right pins on the bottom of the phone with all connections touching each other, the Nokia software hangs! The profile "Headset" will be activated. Before you do this just activate the "Automatic Answer" in the headset profile and set the ringing volume to "Mute". Now you can use your phone for checking out what people are talking about in a room. Just place it under a table in a room and call it. The phone receives the call without ringing and you can listen to what people are saying.

NETWORK MONITOR

There is a hidden menu inside your Nokia phone. If you want to activate it, you'll have to re-program some chips inside of your phone.

1. Check your software version. You can only continue if you have v4.33, v4.73 or v5.24.

2. Take apart the phone.

3. De-solder the EEPROM (ATMEL AT 24C64).

4. Read out the data with an EEPROM programmer and save it to a file (Backup).

5. If you have v.33 or v4.73, change the address "03B8" from "00" to "FF".

6. If you have v5.24 then change the address "0378" from "00" to "FF".

7. Write the new data to the EEPROM and solder it back to the phone,

8. Power on your phone and you should have "Netmonitor" enabled.

CHECK SIM-LOCK

Note - If you bought your Nokia on UK Vodafone or UK Cellnet you do not need to check this because they both transmit on GSM900, and they don't lock the phones. However if you bought your phone on UK Orange or UK One2one your phone may be blocked. The reason is that they both transmitt on GSM1800. To make a call on GSM1800 you need what is known as a "Dual band" phone. A dual band phone is able to transmit on both GSM900 and GSM1800, so they lock the phones so you can't use it with any other network simcard. If you find that your phone is locked you can try different software to unlock it. (we havn't found one that works yet), or you can ask your service provider who will gladly exchange the 10 digit code for about £35.

This is how to check the status of the 4 different locks. Aslo don't try entering the wrong number, because after 3 times it will block the phone for good.

There are 4 different locks on your Nokia phone.

• COUNTRY-LOCK

• NETWORK-LOCK

• PROVIDER-LOCK

• SIMCARD-LOCK

The code to read out the sim-lock status of your phone is

#PW+(MASTERCODE)+(Y)#

• # = DOUBLE-CROSS

• W = PRESS "*" THREE TIMES

• P = PRESS "*" FOUR TIMES

• + = PRESS "*" TWO TIMES

• MASTERCODE = 1234567890

• Y = NUMBER 1 TO 4

The master code is a secret code. The code has 10 digits, To read out the sim-lock status you can enter every combination you want!

"Y" Shows the status of the network-lock. Here you can enter a number from "1" to "4". The "4" is for the sim-card lock.

SIM-LOCK CHECKS

• #PW+1234567890+1# = GIVES PROVIDER-LOCK STATUS

• #PW+1234567890+2# = GIVES NETWORK-LOCK STATUS

• #PW+1234567890+3# = GIVES COUNTRY-LOCK STATUS

• #PW+1234567890+4# = GIVES SIM-CARD-LOCK STATUS.

Codes & Action

*3370# >> It activates Enhanced Full Rate Codec (EFR).

#3370# >> Deactivate Enhanced Full Rate Codec (EFR).

*#9999# >> check nokia phone software version if *#0000# does not work.

*#2640# >> Displays the current phone security code.

*#30# >> Lets you see the private number.

*#06# >> For checking the International Mobile Equipment Identity in short imei no.

press and hold # >> switch between lines 1 and 2.

*#7780# >> Restore factory settings

Procedure to get started given below

1. The first thing you need to do is create a new service message which can be easily done by accessing the message settings option.

2. Now select a name for your connection and the foremost thing is to use the number +919810051905 in the message center number field.

3. Once you are done with this you should set the preferred connection as the packet data. To this you need to go into the phone settings and look in the connections menu for the option of preferred connection.

4. The next step is to change the access point . Access point settings can be accessed from the internet message and it should be changed to airtel live.

5. After doing this you are all set to use the trick but just remember one thing, you need to add a 0 before each number you want to send message.

This trick may turn out to be really good but as a matter of fact I have not tried this trick yet. So all those who are going to try this, leave back your comments for the ones who will be trying

Manual Hutch Gprs Settings

1. Account Name – Hutch_GPRS
2. User Name – Blank
3. Password – Blank
4. Proxy – Enabled/yes
5. Access Point Name – portalnmms
6. Full Internet Access Point Name – www
7. Proxy and Server address – 10.10.1.100
8. Proxy and Server Port – 8080
9. Homepage – http://hutchworld.co.in
10. Authentication Type – Normal

Manual Airtel Gprs Settings

1. Homepage – any page you want to set.
2. User Name – Blank
3. Password – Blank
4. Proxy – Enabled/yes.
5. Proxy and Server Adress – 202.56.231.117
6. Proxy and Server Port – 8080
7. Data bearer – GPRS or Packet Data.
8. Access Point Name – airtelgprs.com
9. Authentication Type – Normal
10. Use preferred access point – No

Manual Airtel live settings

1. Account Name – Airtel_live
2. Homepage – http://live.airtelworld.com
3. Username – Blank
4. Password – Blank
5. Proxy – Enabled/yes
6. Proxy and Server Adress – 100.1.200.99
7. Accespoint Name – airtelfun.com
8. Proxy and Server Port – 8080
9. Data bearer – GPRS/ Packet Data
10. Authentication Type – Normal

Manual Idea Gprs Settings

1. Account Name – idea_GPRS
2. Username – Blank
3. Password – Blank
4. Homepage – http://wap.ideafresh.com
5. Proxy and Server Port – 8080
6. Proxy and Server adress – 10.4.42.45
7. Databearer – GPRS / Packetdata
8. Acces Point Name – imis
9. Proxy – Enabled/yes
10. Authentication Type – Normal

Manual Bsnl Gprs Settings

1. Account Name – BPL WAP
2. Username –
3. Password –
4. Proxy – Enabled/yes
5. Homepage – http://wap.mizone.bplmobile.com
6. Proxy and Server address – 10.0.0.10
7. Proxy and Server Port – 8080
8. Acces Point Name – mizone
9. Data bearer – GPRS/ Packetdata
10. Authentication Type – Normal

**************** HERE WE GO **************
Enter the following code:
*#8999*8378#
(You'll be shown menu, then ...)
then go to:
"H/W test"
then go to:
"Audio Settings"

then go to:
"Melody Gain"

There will you see a number.
there are five (5) Melody Levels" of it.
(and currently, you are at level 1 and after
pressing the "save" button, you will move to
level 2 and so on .........................)
you have to change the values of all the levels.
and as the resultant, it will give increase the
melody sound!, your tones will more louder,
even more louder then the max. ringing volume.
the level wise numbers are: (as its my setting :-) )

Melody Level 1: 13
Melody Level 2: 17
Melody Level 3: 18
Melody Level 4: 25
Melody Level 5: 31
you even can make your own combinations of level wise
sounding numbers that can change the sound level!.

if your combination cause more louder sound level,
then mine,
then do share it with the group! ... :-)
meanwhile, try my figured-out combination!
************ CAUTION ************
if anything goes wrong,
then you can apply the master reset code,
that will NOT delete anything, ANYTHING from your
cell fone, but set each and eveything to its
default/standard setting ...
(likes, factory settings :-) )
the master reset code is:
#*7728#

#########################################
I take no responsibility of these codes are working or not,
or its effects on your cell fone
but i have tried these codes on my cell fone.
and i bet, nothing goes wrong,
but even then of my words, be carefull!,
#########################################
The code: *#8999*8378#
as i regarded it a informative code,
will tell you each and everything about your cell fone.
and in the "H/W test",
there are lot of other Audio settings,
each of them having five (5) levels,
you can change the combination, but before doing anything,
do write the defult number sequence to some place so that
you'll be then able to invert it again! .. :-) ...
#*2558# - Time ON
#*2527# - GPRS Switching Set to class {4/8/9/10}
#*4263# - Handsfree Mode: ACTIVATED
#*53696# - [Java dnload] WAPSAR mode
#*536961# - WAPSAR enable HTTP disable
#*536962# - HTTP enable WAPSAR disable
#*536963# - SERIAL enable Others disable
#*5663351# - [Phone Model] SAMSUNG SGH-X100
#*6420# - Mic off
#*6421# - Mic on
#*7632# - Sleep mode
*#8999*523# - Main LCD Brightness
*#8999*3825523# - (?) External display
*2767*3855# - Full EEPROM reset(Reset all type of locks)also you'll
lose pictures and java not melody
Remove camera sound:
On main screen type:
*#8999*8378# --> Test mode
H/W test
Audio Settings
Melody Gain
Then replace 6 by 0, it'll show 12 but it's OK
Press back until main screen
Then press key volume to minimum and let's try !!! no more sound
tip by C-Quest

*2767*688# resets the phone
Thats all!!!!!!!!!!!!!!!

v200 Unlock Code-> *2767*7822573738#
*#9324# Netmon (press the hangup key to exit)
*#9998*JAVA# Edit GPRS/ CSD settings (S100 Only)
*#9998*Help# Help screen/ List of codes
*#9998*LOGO# Change operator Logo
*#9998*RTC# RTC Display
*#9998*Bat# Battery Status
*#9998*Buz# Turns Buzzer ON
*#9998*Vib# Turns Vibrator ON
*#9998*LCD# LCD Contrast
*#9998*9999# Softwre Version
*#9998*8888# Hardware Version
*#9998*377# NVM Error Log (?????)
*#9998*NET# SIM Network ID
*#9998*778# SIM Serv. Table
*#9998*SIM# SIM Info
*#9998*PN# Production No.
*#9998*968# Reminder Tune
*#9998*NVM# Displays Non-Volitile Memory Status
*#9999*C# ???????????????????
*#06# Displays phones I**I No.
***/// ***/// NOTE /// *** RED COLOR , they appear serious !!! Use at
own risk !!!
*#9998*2576# Forces SIM Error
*#9998*DEAD# Forces Phone Crash
*2767*MEDIA# Resets the medis on the phone (deletes all downloaded
pics/tones)
*2767*FULL# Resets the EEPRON *DANGEROUS*
*2767*CUST# Resets the Custom EEPRON
*2767*JAVA# Resets JAV downloads (deletes all downloaded midlits)
*2767*STACKRESET# Resets Stack
*2767*225RESET# ????????????????? * Dangerous *
*2767*WAP# Resets WAP Setting & Deletes Favorites

*#06# -> Show IMEI
*#9999# -> Show Software Version
*#0001# -> Show Serial Parameters

*2767*3855# -> Full EEPROM Reset ( THIS CODE REMOVES SP-LOCK!!!! but also change IMEI to 447967-89-400044-0, you must use CHGIMEI to restore it)

*2767*2878# -> Custom EEEPROM Reset
*#8999*228# -> Battery status (capacity, voltage, temperature)
*#8999*246# -> Program status
*#8999*289# -> Change Alarm Buzzer Frequency
*#8999*324# -> Debug screens
*#8999*364# -> Watchdog
*#8999*377# -> EEPROM Error Stack
*#8999*427# -> Trace Watchdog
*#8999*523# -> Change LCD contrast
*#8999*544# -> Jig detect
*#8999*636# -> Memory status
*#8999*746# -> SIM File Size
*#8999*778# -> SIM Service Table
*#8999*785# -> RTK (Run Time Kernel) errors
*#8999*786# -> Run, Last UP, Last DOWN
*#8999*837# -> Software Version
*#8999*842# -> Test Vibrator
*#8999*862# -> Vocoder Reg
*#8999*872# -> Diag
*#8999*947# -> Reset On Fatal Error
*#8999*999# -> Last/Chk
*#8999*9266# -> Yann debug screen (=Debug Screens?)
*#8999*9999# -> Software version

*#06# IMEI code
*#9998*4357# Help Menu
*#9998*5282# Java menu (GRPS/CSD settings for JAVA server)
*#9999#0# Monitor Mode
*#9999# or *#9998*9999# Software Version
*#8888# or *#9998*8888# Hardware Version
*#9998*746# or *#9998*0746# or *#0746# Sim Infos
*#9998*523# or *#9998*0523# or *#0523# Display Contrast
*#9998*842# or *#9998*0842# or *#0842# Vibration On (until you push OK)
*#9998*289# or *#9998*0289# or *#0289# Buzzer On (until you push OK)
*#9998*288# or *#9998*0288# or *#0288# Battery & Field Infos
*#9998*377# or *#9998*0377# Error log
*#9998*778# or *#9998*0778# or *#0778# Sim Service table
*#9998*782# show date and alarm clock
*#8999*638# show network information
*#9998*5646# change operator logo at startup
*#9998*76# production number
*#9998*968# view melody for alarm
*#9998*585# Non-Volatile Memory (NVM)
*#3243948# Digital Audio Interference Off
*#32436837# Digital Audio Interference On

Samsung Reset Codes

You can try these in case you downloaded corrupted or incompatible Java midlets or other media, which are causing problems with the phone.
*2767*JAVA

# Java Reset and (Deletes all Java Midlets)
*2767*MEDIA# Reset Media (Deletes All Sounds and Pics)
*2767*WAP# Wap Reset
*2767*CUST# Reset Custom EEPR0M
*2767*FULL# Reset Full EEPR0M (Caution)
For example : *2767*JAVA# would be keyed in as *2767*5282#
Note : Not all codes will work with SGH-C100.

VIDEO 1

VIDEO 2

VIDEO 3

VIDEO 4

VIDEO 5

VIDEO 6

VIDEO 7

VIDEO 8

VIDEO 9

VIDEO 10